You have added a new disk or increased the size of your LUN, or increased the size of the virtual disk in case of virtual machines, and now you need to increase the partition, the Logical Volume and the filesystem in order to be able to use the new space.
In this post I go through the steps necessary to make this happen in a RHEL 5.3 system.
The LUN I will increase has 20GB and it had an LVM partition. I decided to increase the LUN size to 72GB and this is how it looks now.
[root@server~]# fdisk -lu
Disk /dev/sdb: 77.3 GB, 77309411328 bytes
255 heads, 63 sectors/track, 9399 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytesDevice Boot Start End Blocks Id System
/dev/sdb1 * 1 2611 20971488 8e Linux LVM
I need to perform the following steps in order to be able to use the new space.
1. Increase the size of the partition using fdisk
[root@server ~]# fdisk /dev/sdb
Command (m for help): u //Change the display to sectors
Changing display/entry units to sectorsCommand (m for help): p //Print the current partition table for that drive
Disk /dev/sdb: 77.3 GB, 77309411328 bytes
255 heads, 63 sectors/track, 9399 cylinders, total 150994944 sectors
Units = sectors of 1 * 512 = 512 bytesDevice Boot Start End Blocks Id System
/dev/sdb1 * 64 41943039 20971488 8e Linux LVMCommand (m for help): d //Delete the partition information, we will recreate
Selected partition 1Command (m for help): n //Create partition
Command action
e extended
p primary partition (1-4)
p //In this case it is primary
Partition number (1-4): 1 // In this case it is the first partition on the drive
First sector (63-150994943, default 63): 64 //Align partition if used on NetApp
Last sector or +size or +sizeM or +sizeK (64-150994943, default 150994943):
Using default value 150994943Command (m for help): t //Change type from Linux(default) to Linux LVM
Selected partition 1
Hex code (type L to list codes): 8e //Linux LVM partition type
Changed system type of partition 1 to 8e (Linux LVM)Command (m for help): p //Print again to double check
Disk /dev/sdb: 77.3 GB, 77309411328 bytes
255 heads, 63 sectors/track, 9399 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytesDevice Boot Start End Blocks Id System
/dev/sdb1 1 9400 75497440 8e Linux LVMCommand (m for help): w //Write the partition table
The partition table has been altered!Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table.
The new table will be used at the next reboot.
Syncing disks.
2. You need to reboot for the changes to take place, or just run
server# partprobe
3. Make LVM acknowledge the new space
[root@server ~]# pvresize /dev/sdb1
4. Check that the Volume group shows the new space
[root@server ~]# vgs
VG #PV #LV #SN Attr VSize VFree
vg0 1 2 0 wz–n- 71.97G 52.00G
5. Extend the logical volume:
make it total of 28G in this example
[root@server~]# lvresize -L 28G /dev/mapper/vg0-lvhome
Extending logical volume lvhome to 28.00 GB
Logical volume lvswap successfully resized
You can also take all the free space available
[root@server ~]# lvresize -l +100%FREE /dev/mapper/vg0-lvhome
Extending logical volume lvhome to 67.97 GB
Logical volume lvhome successfully resized
6. Use the rest for whatever partition you want
[root@server~]# lvcreate -l 100%FREE -n lvdata vg0
7. Resize the Filesystem
[root@server~]# resize2fs /dev/mapper/vg0-lvhome
resize2fs 1.39 (29-May-2006)
Filesystem at /dev/mapper/vg0-lvhome is mounted on /home; on-line resizing required
Performing an on-line resize of /dev/mapper/vg0-lvhome to 9953280 (4k) blocks.
The filesystem on /dev/mapper/vg0-lvhome is now 9953280 blocks long.
Comments
Leave a comment Trackback